The Blizzard Sno-Wand provides users with a low cost, and versatile snowmaking capability.
The Sno-Wand works as an attachment with an
air compressor (not included). It may also be used in conjunction with a pressure
washer for greater snow output .
Quick & easy assembly takes less
than 10 minutes without tools!
When attached to a garden hose with average household water pressure, and to an air compressor, the gun will produce approximately 12 cubic feet of snow per hour. Add a 2.1 gpm pressure washer and
the gun will pump out approximately 50 cubic feet of snow per hour.
Users can purchase or rent the required operating
components. Please review the minimum component requirements presented
below to insure compatibility. There is a possibility that
non-compatible components may be damaged by normal use with the Sno-Wand. Please
feel free to call us at (508) 655-1759 for advice.
The following provides specifications for the
compressors and pressure washers that are recommended for use with the Sno-Wand:
Minimum Component Requirements:
Compressor
Operators should ensure that the compressor has the following capabilities:
- 6 CFM @ 100 psi
- 100% duty cycle
Pressure Washer
Operators should ensure that the pressure washer has the following capabilities:
- 2.1 GPM @ 500 PSI
- 100% duty cylcle
Using models that don't meet
the specifications stated above for the purposes of snowmaking may result in damage to the machines. SnowStation is not responsible for damages to any components used with the
Sno-Wand.
Requires outside temperatures
of 25 degrees Fahrenheit or below.
